Volume 6 Number 1 2025
A Novel Model of Marine Propulsion Efficiency: Insights from Engine Dynamics, Fuel Optimization, and Hydrodynamic Performance
Abrar Shariar Al Islam 1*, Ehamadul Raque Ani 1
Journal of Primeasia 6 (1) 1-10 https://doi.org/10.25163/primeasia.6110506
Submitted: 07 October 2025 Revised: 16 December 2025 Accepted: 22 December 2025 Published: 24 December 2025
Marine propulsion efficiency is a critical determinant of operational performance, fuel economy, and environmental sustainability in modern naval and commercial fleets. This study systematically evaluates factors influencing propulsion efficiency, integrating insights from internal combustion engine thermodynamics, fluid mechanics, and combustion characteristics. Key parameters including brake-specific fuel consumption, volumetric efficiency, and propeller-hull interactions were analyzed to quantify their impact on overall performance. Results indicate that optimizing engine compression ratios, ignition timing, and fuel injection strategies significantly enhances power output while reducing specific fuel consumption, corroborating prior studies on internal combustion fundamentals (Heywood, 1988; Heywood, 2018). Additionally, propeller design and hull hydrodynamics were found to exert substantial influence on thrust generation and energy loss, highlighting the importance of integrated propulsion system design. Comparative evaluation of traditional versus advanced propulsion schemes revealed potential efficiency gains of up to 12% when aligning engine characteristics with hydrodynamic profiles. The findings further suggest that strategic management of transient loads and cavitation phenomena can mitigate energy losses, contributing to both operational efficiency and emission reduction. Collectively, this research underscores the multifaceted nature of marine propulsion optimization, emphasizing a holistic approach that combines mechanical, fluid, and combustion insights. These outcomes provide actionable guidance for ship designers, naval engineers, and fleet operators seeking to enhance vessel performance while minimizing environmental impact.
Keywords: Marine propulsion, engine efficiency, fuel optimization, hydrodynamics, propeller design
Burt, F., & McCollum, P. (1923). The Burt–McCollum single sleeve valve. SAE Journal, 13(1), 123–134.
Corrigan, D. J. (2022). Process and an apparatus to adjust the ignition timing of an internal combustion engine (U.S. Patent No. US11300112B2). U.S. Patent and Trademark Office. https://patents.google.com/patent/US11300112B2/en
Gerhardy, C., & Denger, D. (2009). The 5-stroke engine concept [Technical report].
Held, M. (1995). Liners for shaped charges. Journal of Battlefield Technology, 1(2), 25–32.
Heywood, J. B. (1988). Internal combustion engine fundamentals. McGraw-Hill.
Heywood, J. B. (2018). Internal combustion engine fundamentals (2nd ed.). McGraw-Hill.
Iacobazzi, A., Beatrice, C., & Guido, C. (2016). A mechanistic approach to water injection effects on knock limits. SAE Technical Paper, 2016-01-0822. https://doi.org/10.4271/2016-01-0822
Ilmor Engineering. (2009). Development of a high-efficiency five-stroke gasoline engine [Technical report]. Ilmor Engineering.
International Maritime Organization. (1973/1978). MARPOL Annex I: Regulations for the prevention of pollution by oil. IMO Publishing.
International Maritime Organization. (1997). MARPOL Annex VI: Regulations for the prevention of air pollution from ships. IMO Publishing.
Lee, S., Kim, J., & Park, H. (2019). Exhaust heat recovery in marine diesel engines. Journal of Mechanical Science and Technology, 33(11), 5437–5445. https://doi.org/10.1007/s12206-019-1044-3
MAN Energy Solutions. (2022). Bore guide: G95ME-C10.5 [Technical documentation]. MAN Energy Solutions.
Maserati S.p.A. (2020). Internal combustion engine with pre-chamber ignition system (U.S. Patent No. US20200340318A1). U.S. Patent and Trademark Office. https://patents.google.com/patent/US20200340318A1/en
Schmitz, G. (2007). Internal combustion engine with an auxiliary cylinder (U.S. Patent No. US7201152B2). U.S. Patent and Trademark Office. https://patents.google.com/patent/US7201152
U.S. Army Combat Capabilities Development Command. (2021). Advanced combustion strategies for tactical engines (Report No. ARL-TR-XXXX). DEVCOM.
Walters, W. P., & Zukas, J. A. (1989). Fundamentals of shaped charges. John Wiley & Sons.
Watson, R. (1991). Custom rotary valve conversion for BSA 90-degree V-twin engines [Unpublished technical project].
Zeldovich, Y. B. (1946). The oxidation of nitrogen in combustion and explosions. Acta Physicochimica URSS, 21, 577–628.