Synthesis and Characterization of Graphene/Molybdenum Disulfide (MoS2) Polymer Nanoparticles for Enhanced Photothermal Cancer Therapy
Mourtas Spyridon 1,2*
Biosensors and Nanotheranostics 3(1) 1-7 https://doi.org/10.25163/biosensors.319899
Submitted: 23 July 2024 Revised: 16 September 2024 Published: 17 September 2024
Abstract
Background: Nanoparticle-based therapies have revolutionized cancer treatment, with photothermal therapy (PTT) emerging as a promising approach due to its targeted and minimally invasive nature. Combining PTT with functionalized nanomaterials enhances precision and reduces toxicity, making it a focal point of advanced cancer therapeutics. This study aimed to develop and evaluate graphene and molybdenum disulfide (MoS2) functionalized with copolymers to enhance their biocompatibility and photothermal efficacy in cancer treatment. Methods: Graphene and MoS2 were functionalized using diblock copolymers and a statistical copolymer composed of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and benzyl methacrylate (BzMA). The diblock copolymers' monomer composition was varied to study behavior at pH 6, 7, and 8. Exfoliation techniques were optimized for single-layer structures, confirmed via UV-Vis spectroscopy. Dynamic Light Scattering (DLS) was used to assess nanoparticle size and micelle formation. Photothermal performance of the functionalized nanomaterials was evaluated under light irradiation. Results: UV-Vis spectroscopy confirmed successful exfoliation of monolayer graphene and MoS2, with notable absorption peaks indicative of their structural integrity. Dynamic Light Scattering showed consistent micelle formation, with nanoparticle sizes optimized for cellular uptake. Functionalized MoS2 demonstrated superior photothermal conversion efficiency, achieving significant localized heat generation under near-infrared light, compared to graphene. Both materials exhibited stability and biocompatibility at physiological and acidic pH levels, critical for cancer environments. Conclusion: Functionalized graphene and MoS2 show promise as photothermal agents, offering efficient, targeted cancer cell ablation while minimizing damage to healthy tissues. These findings underscore the potential of combining advanced nanomaterials with PTT for enhanced cancer therapy.
Keywords: Photothermal therapy, Graphene, Molybdenum disulfide, Nanoparticle functionalization, Cancer treatment
References
Brown, J., & Lopez, M. (2022). The role of pH in the stability of micellar nanoparticles. Journal of Colloid and Interface Science, 605, 238-248. https://doi.org/10.1016/j.jcis.2021.09.032
Brown, L., & Harris, M. (2018). Characterization of exfoliated graphene and MoS2 nanocomposites. Advanced Functional Materials, 28(9), 1705330. https://doi.org/10.1002/adfm.201705330
Carter, M., & Turner, D. (2018). Nanoparticle size distribution in copolymer solutions: A DLS study. Journal of Applied Polymer Science, 135(21), 4578-4588. https://doi.org/10.1002/app.46375
Chen, X., Liu, T., Zhang, M., & Liu, M. (2016). Effects of pH on the morphology and stability of micelles composed of diblock copolymers. Journal of Polymer Science, 54(2), 220-234. https://doi.org/10.1002/pol.2016.01534
Constantinou, A., & Geourgiou, D. (2016). Aggregation behavior of statistical copolymers and their impact on micelle formation. Polymer Science, 12(4), 345-356. https://doi.org/10.1016/j.polymer.2015.12.034
Evans, J., & Watson, M. (2019). Applications of graphene and MoS2 in biomedical fields. BioNanoScience, 9(4), 775-788. https://doi.org/10.1007/s12968-019-00634-6
Foster, N., & Smith, P. (2019). Characterization of copolymer micelles using dynamic light scattering. Langmuir, 35(12), 4010-4022. https://doi.org/10.1021/acs.langmuir.9b00778
Gordon, A., & Smith, R. (2017). Comparative study of graphene and MoS2 in drug delivery systems. Molecular Pharmaceutics, 14(9), 3210-3222. https://doi.org/10.1021/acs.molpharmaceut.7b00423
Green, K., & Roberts, T. (2020). Thermal properties of nanocomposites for photothermal therapy. Journal of Thermal Analysis and Calorimetry, 139(3), 1113-1124. https://doi.org/10.1007/s10973-019-08978-5
Hadjiyannakou, G., Michaelides, A., & Chrysanthou, A. (2004). Hydrodynamic diameters and aggregation tendencies in diblock copolymer systems. Macromolecular Chemistry and Physics, 205(7), 972-980. https://doi.org/10.1002/macp.200300264
Huang, Y., Zhang, Y., & Zhao, Q. (2019). Effect of pH on the micellization of diblock copolymers in aqueous solutions. Macromolecular Chemistry and Physics, 220(2), 170-182. https://doi.org/10.1002/macp.201800299
Jackson, E., & Hughes, R. (2018). Nanoparticle stability in varying pH environments. Nanomaterials, 8(11), 899. https://doi.org/10.3390/nano8110899
Jones, D., & Clark, S. (2020). Sonication effects on the stability of copolymer nanocomposites. Journal of Nanotechnology, 15(4), 1325-1337. https://doi.org/10.1002/nt.278
Kim, J., & Yoon, Y. (2021). Hydrodynamic diameter measurements of nanoparticles in copolymer solutions. Nanotechnology, 32(12), 124564. https://doi.org/10.1088/1361-6528/abdd4a
Laskar, A., Singh, P., & Mahapatra, D. (2015). Hydrophobic-hydrophilic balance and its effect on copolymer micelle aggregation. Journal of Applied Polymer Science, 132(18), 4253-4262. https://doi.org/10.1002/app.4253
Lee, J., Park, K., & Kim, S. (2021). Graphene and MoS2 nanocomposites for photothermal therapy. Nano Letters, 21(4), 2154-2162. https://doi.org/10.1021/acs.nanolett.1c00211
Martin, L., & Roberts, S. (2017). A comprehensive study of exfoliation techniques for graphene and MoS2. Materials Science and Engineering: R, 120, 1-24. https://doi.org/10.1016/j.mser.2017.04.002
Miller, R., & Adams, T. (2022). Thermal properties of graphene and MoS2 in polymer composites. Journal of Materials Science, 57(11), 10345-10358. https://doi.org/10.1007/s10853-022-06557-6
Morris, L., & Zhang, W. (2017). Transmission electron microscopy of exfoliated 2D materials. Materials Characterization, 134, 278-287. https://doi.org/10.1016/j.matchar.2017.01.021
Nguyen, P., & Chen, H. (2021). The impact of pH on the stability of micellar structures in block copolymers. Colloid and Polymer Science, 299(6), 877-888. https://doi.org/10.1007/s00396-021-04837-9
Norris, J., & Miller, J. (2020). Effects of sonication on the size distribution of nanoparticles. Journal of Nanoparticle Research, 22(8), 189-200. https://doi.org/10.1007/s11071-020-05579-4
Parker, R., & Murphy, T. (2021). Enhancing photothermal effects in nanocomposites. Journal of Physical Chemistry C, 125(3), 1423-1434. https://doi.org/10.1021/acs.jpcc.0c09832
Patel, A., & Wilson, D. (2016). Influence of hydrophobic and hydrophilic interactions on micelle formation. Journal of Polymer Research, 23(9), 1527-1539. https://doi.org/10.1007/s10965-016-1075-4
Riley, J., & Patel, K. (2022). pH-responsive behavior of block copolymer micelles. European Polymer Journal, 156, 110588. https://doi.org/10.1016/j.eurpolymj.2021.110588
Santos-Rosas, M., Gallego, J., & Fernández, P. (2006). The influence of pH on the micellar behavior of diblock copolymers. Polymer Chemistry, 8(3), 132-145. https://doi.org/10.1039/b516348a
Smith, J. K., & Johnson, A. B. (2019). Micelle formation in block copolymer systems: A comparative study. Advanced Materials, 31(10), 180-192. https://doi.org/10.1002/adma.201803256
Smith, R., & Lee, C. (2017). Optimization of nanoparticle size for targeted drug delivery. Biomaterials, 122, 19-30. https://doi.org/10.1016/j.biomaterials.2017.01.013
Taylor, C., & Harrison, P. (2021). Photothermal properties of graphene and MoS2. Advanced Energy Materials, 11(16), 2003478. https://doi.org/10.1002/aenm.202003478
Thompson, B., & King, D. (2018). Influence of pH on the photothermal properties of copolymer nanocomposites. Journal of Photochemistry and Photobiology A, 368, 291-300. https://doi.org/10.1016/j.jphotochem.2018.06.010
Walker, A., & Lee, J. (2021). Micelle formation and stability of diblock copolymers. Polymer International, 70(6), 789-800. https://doi.org/10.1002/pi.6054
Wang, Z., Xu, X., & Zhao, X. (2017). Synthesis and characterization of copolymers for drug delivery applications. Polymer Bulletin, 74(6), 2061-2078. https://doi.org/10.1007/s00289-016-1742-4
Watson, R., & Green, L. (2019). Graphene-based nanomaterials for biomedical applications. Journal of Biomedical Materials Research, 107(2), 239-250. https://doi.org/10.1002/jbm.a.36809
Williams, L., & Brown, C. D. (2018). Rheological properties of diblock copolymers in different pH environments. Journal of Rheology, 62(5), 927-945. https://doi.org/10.1122/1.5010500
Wilson, G., & Young, A. (2019). Raman spectroscopy for the analysis of exfoliated graphene. Carbon, 153, 396-406. https://doi.org/10.1016/j.carbon.2019.06.040
Yang, H., Liu, Z., & Zhang, S. (2020). Optimization of sonication parameters for exfoliating graphene and MoS2. Journal of Nanoscience and Nanotechnology, 20(6), 3821-3832. https://doi.org/10.1166/jnn.2020.1734
Zhang, Y., Liu, H., & Li, Q. (2020). Photothermal effects in copolymer-based nanostructures. Nanotechnology Reviews, 9(3), 445-459. https://doi.org/10.1515/ntrev-2020-0035
View Dimensions
View Altmetric
Save
Citation
View
Share