Biocompatible Nanomaterial TiN, ZrN and TiAlN Thinfilms Coating on Surgical Tools by Cathodic Arc Deposition
Saba Zafar 1*
Biosensors and Nanotheranostics 3(1) 1-10 https://doi.org/10.25163/biosensors.317336
Submitted: 08 November 2023 Revised: 16 January 2024 Published: 19 January 2024
Abstract
Background: Thin film coating is a widely employed process across industries such as electronics, optics, solar energy, and aerospace to enhance surface properties or improve performance. The process can be carried out using various methods, including physical vapor deposition (PVD) and chemical vapor deposition (CVD). Cathodic arc deposition, a PVD technique, is notable for its ability to produce thin films of materials like titanium nitride (TiN), zirconium nitride (ZrN), and titanium aluminum nitride (TiAlN), which are valued for their hardness, wear resistance, and biocompatibility, making them suitable for coating surgical tools. Methods: This study utilized cathodic arc deposition to produce TiN, ZrN, and TiAlN thin films on 316 stainless steel substrates. In the cathodic arc deposition process, a high-voltage electrical discharge is generated between a cathode target material and an anode within a vacuum chamber. This discharge vaporizes the target material, creating a plasma that condenses onto the substrate, forming a thin film. The hardness of the materials and Raman spectroscopy were used to characterize and compare the three thin films. Raman spectroscopy was employed to gather information on molecular bonding, crystal structure, and chemical composition. Results: The characterization revealed that both ZrN and TiN thin films demonstrated superior hardness, which contributes to good adhesion, wear resistance, and biocompatible properties essential for coating surgical tools. The Raman spectroscopy results provided detailed insights into the molecular bonding, crystal structures, and chemical compositions of the films. The ZrN and TiN films were found to be particularly suitable for depositing colored thin films on surgical tools due to their high hardness. Conclusion: The study confirms that TiN and ZrN thin films produced via cathodic arc deposition are highly suitable for coating surgical tools, owing to their excellent hardness, adhesion, wear resistance, and biocompatibility. These properties make them ideal for applications where durability and biocompatibility are critical. Further research is required to explore various decorative color coatings on surgical tools that maintain biocompatibility, enhancing both the functional and aesthetic aspects of these tools.
Keywords: Thin film technology, Surface modifications, Titanium nitride (TiN), Surgical tools, Cathodic arc deposition, Coating
References
Barshilia, H. C., & Rajam, K. S. (2004). Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings. Journal of Materials Research, 19(11), 3196-3205.
Bendavid, A., Martin, P. J., Netterfield, R. P., & Kinder, T. J. (1996). Characterization of the optical properties and composition of TiNx thin films by spectroscopic ellipsometry and X-ray photoelectron spectroscopy. Surface and Interface Analysis, 24(9), 627-633.
Boercker, D. B., Falabella, S., & Sanders, D. M. (1992). Plasma transport in a new cathodic arc ion source: Theory and experiment. Surface and Coatings Technology, 53(3), 239-242.
Bube, R. H. (1992). Electrons in solids: An introductory survey. Academic Press.
Constable, C. P., Yarwood, J., & Münz, W. D. (1999). Raman microscopic studies of PVD hard coatings. Surface and Coatings Technology, 116, 155-159.
Harsha, K. S. (2005). Principles of vapor deposition of thin films. Elsevier.
Hofmann, D., Beiβwenger, S., & Feuerstein, A. (1991). Novel low temperature hard coatings for large parts. Surface and Coatings Technology, 49(1-3), 330-335.
Hofmann, D., Kunkel, S., Schuessler, H., Teschner, G., & Gruen, R. (1996). Etching and sputter-ion plating using pulsed dc. Surface and Coatings Technology, 81(2-3), 146-150.
Hollstein, F., Kitta, D., Louda, P., Pacal, F., & Meinhardt, J. (2001). Investigation of low-reflective ZrCN–PVD-arc coatings for application on medical tools for minimally invasive surgery. Surface and Coatings Technology, 142, 1063-1068.
Hsieh, J. H., Liang, C., Yu, C. H., & Wu, W. (1998). Deposition and characterization of TiAlN and multi-layered TiN/TiAlN coatings using unbalanced magnetron sputtering. Surface and Coatings Technology, 108, 132-137.
Karlsson, L., Hultman, L., Johansson, M. P., Sundgren, J. E., & Ljungcrantz, H. (2000). Growth, microstructure, and mechanical properties of arc evaporated TiCxN1− x (0≤ x≤ 1) films. Surface and Coatings Technology, 126(1), 1-14.
Kuznetsov, M. V., Zhuravlev, M. V., Shalayeva, E. V., & Gubanov, V. A. (1992). Influence of the deposition parameters on the composition, structure and X-ray photoelectron spectroscopy spectra of Ti—N films. Thin Solid Films, 215(1), 1-7.
Loeffler, B. M., & Burns, R. G. (1976). Shedding light on the color of gems and minerals: The selective absorption of light according to wavelength—the result of various electronic processes whose energies correspond to certain wavelengths of visible light—gives minerals their distinctive hues. American Scientist, 64(6), 636-647.
Logothetidis, S., Alexandrou, I., & Papadopoulos, A. (1995). In situ spectroscopic ellipsometry to monitor the process of TiNx thin films deposited by reactive sputtering. Journal of Applied Physics, 77(3), 1043-1047.
Louw, C. W., Strydom, I. L., Van den Heever, K., & Van Staden, M. J. (1991). Selective steam oxidation of titanium and aluminium in TiN and (Ti, Al) N physically vapour-deposited coatings on dental surgical tools. Surface and Coatings Technology, 49(1-3), 348-352.
Martin, P. M. (2009). Handbook of deposition technologies for films and coatings: Science, applications and technology. William Andrew.
Mattox, D. M. (1999). Physical vapor deposition (PVD) processes. Metal Finishing, 97(1), 417-430.
Mitterer, C., Waldhauser, W., Beck, U., & Reiners, G. (1996). Structure and properties of decorative rare-earth hexaboride coatings. Surface and Coatings Technology, 86, 715-721.
Münz, W. D. (1986). Titanium aluminum nitride films: A new alternative to TiN coatings. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 4(6), 2717-2725.
Nassau, K. (1980). The causes of color. Scientific American, 243(4), 124-155.
Niyomsoan, S., Grant, W., Olson, D. L., & Mishra, A. B. (2002). Variation of color in titanium and zirconium nitride decorative thin films. Thin Solid Films, 415(1-2), 187-194.
Ohring, M. (2001). Materials science of thin films: Deposition and structure. Elsevier.
Randhawa, H. (1988). Hard coatings for decorative applications. Surface and Coatings Technology, 36(3-4), 829-836.
Reiners, G., Beck, U., & Jehn, H. A. (1994). Decorative optical coatings. Thin Solid Films, 253(1-2), 33-40.
Schlegel, A., Wachter, P., Nickl, J. J., & Lingg, H. (1977). Optical properties of TiN and ZrN. Journal of Physics C: Solid State Physics, 10(23), 4889.
Sherwood, E. M., & Blocher, J. M. (1965). Vapor deposition: The first hundred years. JOM, 17, 594-599.
Sproul, W. D. (1996). Physical vapor deposition tool coatings. Surface and Coatings Technology, 81(1), 1-7.
Tracton, A. A. (2005). Coatings technology handbook. CRC Press.
Van Raay, J. J. A. M., Rozing, P. M., Van Blitterswijk, C. A., Van Haastert, R. M., & Koerten, H. K. (1995). Biocompatibility of wear-resistant coatings in orthopaedic surgery in vitro testing with human fibroblast cell cultures. Journal of Materials Science: Materials in Medicine, 6, 80-84.
Wert, C. A., & Thomson, R. M. (1964). Physics of solids. (No Title).
Witke, T., Schuelke, T., Schultrich, B., Siemroth, P., & Vetter, J. (2000). Comparison of filtered high-current pulsed arc deposition (φ-HCA) with conventional vacuum arc methods. Surface and Coatings Technology, 126(1), 81-88.
Wolfe, D. E., & Singh, J. (2000). Titanium carbide coatings deposited by reactive ion beam-assisted, electron beam–physical vapor deposition. Surface and Coatings Technology, 124(2-3), 142-153.
Zallen, R. (1966). In F. Abeles (Ed.), Optical properties and electronic structure of metals and alloys (pp. 164–174). North-Holland.
View Dimensions
View Altmetric
Save
Citation
View
Share